Welding Trailer Day 4

I started the day out by mounting the Oxy/Acy bottles on the trailer on the front right hand corner. You can't see it real good in the pictures, but I cut out the floor and dropped in some 3" angle to make a box for them to set down in. I them made a brace to support them upright with an allthread bolt to hold them into place. I then went to work fabricating the cutting torch hose holder and welded it into place. I then gusseted all three holders at the bottom and welded them into place. The holders are a little shaky from side to side, but not front to back. I am going to have to weld a brace connecting all three to keep that from happening. Still thinking on that one. Saturday I hope to trim in the fender wells, and close up all the ends of the channels that are exposed. Hopefully have time to move the lights and mount the license plate. Or work on the toolboxes.